Adjustable Classroom Table is an adjustable student desk developed by AOYAISI FURNITURE specifically for dynamic teaching needs. With "flexible adaptation, durability, safety and health" as the core design concept, it meets the teaching scenarios of all stages from early childhood education to higher education. Adjustable Classroom Table breaks through the fixed limitations of traditional desks through the 600-800mm stepless height adjustment system. Combined with the 700mm (length) × 500mm (width) large-size desktop and modular structure, it supports multiple teaching modes such as sitting learning, standing discussion, and collaborative experiments.
Adjustable Classroom Table solves the problem of sitting fatigue caused by height differences among students through ergonomic dynamic adaptation. The desktop is made of 25mm thick PP injection molding material, which is both lightweight and impact-resistant, and the edge rounded corner design avoids collision damage. The overall structure uses high-strength elliptical steel pipes as the skeleton, and achieves rapid assembly and functional expansion through standardized interfaces. It is an ideal infrastructure for modern classrooms, laboratories and multi-functional learning spaces.
Adjustable Classroom Table Features
1. Full-scenario height adjustment, precise adaptation to growth needs
600-800mm wide adjustment: Through the hydraulic lifting system and mechanical locking dual-mode control, teachers can adjust the desk height with one click, suitable for children from 5 years old to adults.
Chair-table linkage design: The matching chair supports 400-550mm seat height adjustment, and the chair back tilt is adjustable (, ensuring that students sit with their feet flat and their backs naturally fit.
2. PP injection molded desktop, super durability
25mm thickened PP material: passed ISO 9001 quality certification, with a bending strength of 50MPa, and can withstand the impact of 50kg weight without deformation.
Antibacterial and anti-fouling surface: Add nano-level silver ion coating to inhibit the growth of Escherichia coli and Staphylococcus aureus, and wipe with a wet cloth to clean handwriting or oil stains.
3. Modular metal drawer system
Layered drawer design: The main drawer is 150mm high, with a built-in detachable partition board, which supports the classified storage of stationery and tablets; a hook interface is reserved at the bottom to hang schoolbags.
4. Military-grade steel frame structure
Main support pipe specifications: The desk frame adopts 60×30mm+50×25mm double elliptical steel pipe, the welding nodes pass X-ray flaw detection, and the compressive strength exceeds 800kg/m².
Anti-rust treatment: The steel pipe is treated by six processes (pickling → phosphating → electrostatic spraying → high temperature curing → UV protective layer → anti-oxidation coating), and the salt spray test is more than 1000 hours without rust.
5. Multi-scenario color solution
12 color steel frames are optional: In addition to the basic colors, Morandi colors are added to suit special scenes such as IB international schools and Montessori education.
Desktop customization service: Supports laser engraving of school badges or curriculum schedules to enhance brand belonging.
Adjustable Classroom Table Application
1. Hybrid teaching classroom
The 800mm height position supports standing group collaboration, and the 700×500mm desktop can simultaneously unfold laptops, experimental equipment and reference materials, which is suitable for PBL mode.
2. Special education school
The hydraulic adjustment system allows teachers to quickly lower the desk to 600mm, which is suitable for wheelchair students; the rounded corner design of the PP desktop reduces the risk of collision for students with limited mobility.
3. Maker space and STEM laboratory
The desktop is resistant to chemical corrosion and can be directly used for circuit welding or small chemical experiments; the drawer partition is compatible with Arduino kits and sensor modules for classified storage.
4. International examination center
The magnetic drawer realizes silent access to stationery, which meets the silent requirements of international examinations such as IELTS and SAT; the white or dark gray steel frame meets the serious atmosphere of the examination room.
5. Outdoor research base
The weather resistance of PP material and the rust resistance of steel frame are suitable for semi-open tent classrooms or forest schools, and can resist harsh environments such as humidity and sunlight.
1. PP desktop deep care
Wipe with PP special care agent every month to prevent direct sunlight from causing aging and yellowing.
If there are glue stains, soak with ethanol for 10 minutes and then gently scrape it off. Metal scrapers are prohibited.
2. Long-term anti-rust strategy for steel frames
Check the integrity of the coating every quarter, and immediately apply ED electrophoretic paint if scratches are found.
In high-humidity areas, moisture-proof bags need to be placed at the joints of steel pipes.
3. Adjustment system life management
Replace the sealing ring of the hydraulic lifting rod every two years to avoid oil leakage and failure.
The mechanical locking mechanism drips lubricating oil every semester to ensure the sensitivity of the buckle.
4. Drawer system optimization
The magnetic guide rail is treated with a demagnetizer every six months to maintain the adsorption force; the ball bearing needs to be cleaned of hair and dust to prevent jamming.
The partition can be washed and cleaned, but it needs to be thoroughly dried before reinstalling to prevent rust on the metal card slot.
5. Safe use of power module
The surface of the wireless charging plate should be cleaned regularly with a glasses cloth to prevent foreign matter from interfering with electromagnetic induction.
AOYASI FURNITURE CO., LTD, previously well-known as SONGYE OFFICE FURNITURE CO., LIMITED and AU-PINY FUNIRTURE Co., LTD, originated in 1986. Specializing in manufacturing and exporting school and office furniture. We are now experiencing an annual turnover exceeding USD 10 Million. Our factory covers an area of over 30,000(㎡), currently having more than 150 employees and over 100 advanced production facilities. We have separate workshops such as cutting, stamping, welding, polishing, metal surface treatment, electrostatic powder coating, woodworking, plastic working, general assembly , final packaging.
We always strictly implement ISO9001:2000 (Quality Management System), ISO14001:2004 (Environmental Management System) and OHSAS18001 (Occupational Health and Safety Management System). We have also successfully passed certification of CHINA ENVIRONMENTAL LABELLING and CQC CHINA ECOLABELLING. Our products include student desks and chairs, conference hall seating, library bookshelves, periodical shelves, book cabinets, document cabinets, office tables, bunk beds, combination bunk beds and so on. They are available in various designs and models. Our monthly production capacity is 200,000 sets of desk and chair.
Marketed under our patented brand "SONGYE" and “LAB”, our products are exported widely to overseas. 80% of our total yearly output are manufactured for exports to the Africa, Middle East, South East Asia, Oceania and other continents. The remainder of our production go to the domestic schools and retailers.
